"Brother" rašalai, toneriai, juostos ir terminės etiketės Pasirūpinkite, kad įrenginiai veiktų sklandžiai, naudodami originalias rašalo ir tonerių kasetes, juostas ir termines etiketes, geriausios kokybės popieriaus paketus ir greitai keičiamas atsargines dalis. Naršyti visus priedus
Advanced Functions (for Administrators) (1) Protect your Brother machine against unauthorised access over the network
Copy (5) One or more of my colours are not printing. The edge of glossy paper is smudged. The rainbow cursor keeps spinning when I click on Copy/PC-FAX in ControlCenter2 (For Mac OS X 10.7). When a large capacity xD-Picture Card™ is inserted into the media slot, I have noticed that the copy speed in "Best" quality modeis slower than when the media card is removed. When I print, the pages are smudged with ink. What should I do?
Error Messages (33) "Near Empty [Colour]" is appearing on my Brother machine’s LCD? "How do I clear the message Unable to..." ( "Unable to Change" "Unable to Clean" "Unable toInit" "Unable to Print" "Unable to Scan" )? How do I clear Machine Error 46? How do I clear the message "INK EMPTY" from the display? How do I clear the message "PAPER JAM" from the display? I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X) I cannot use Scan to E-mail with Outlook2003 or Outlook2007 after updating ControlCenter3. The error message "command lineargument is invalid" appears. What can I do? I get an error "Print Queue is stopped" using Mac OSX 10.2-10.4 I replaced my ink cartridge, but the LCD is still displaying "Ink Empty". I'm trying to install the driver with network settings, but the installation wizard is not able to locate the Brother machineon my network, I'm getting the message "No devices could be found over the network". I’m using Windows XP and when I attempt to install the USB drivers on my Brother machine I receive the message "Cannot Installthis Hardware". I'm using Windows. When I try to Scan to E-mail I get an error saying "the command line argument is not valid. Verify the switchyou are using". My Antivirus Software gives a warning message during the installation of Web BRAdmin. The error message "[model name] cannot be found. ... (CC3-202-03031b02)" appears when scanning a document usingControlCenter3 on Windows 7 with the USB connection. The error message "An error occurred during the installation. ... . IS015- GetOsVersion - 1" appears wheninstalling the Full Driver & Software Packages for Windows 7 downloaded from the "Download" section. The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater) The error message "IS052 InstallNetworkDriver" appears when installing the MFL-Pro Suite from the CD-ROM or the FullDriver & Software Package is downloaded from the "Downloads" section. The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device). The LCD displays an error code (number). What does it mean? The LCD message "Standing by ON/OFF to resume" is displayed on my Brother machine. The message "[file name] can't be opened because it is from an unidentified developer." appears on OS X v10.8.x. When I run the Firmware update tool or the I-FAX install tool, the "Program failed to run" message appears on my PCscreen. What do I do? When I start the Remote Setup Software, the error message "RS 005-xx" or "RS 006-xx" appears on the display. When I try to install the Full Windows Vista™.Driver & Software Package I receive the error message "Unhandled Exception". When I try to install the MFL-Pro Suite from the CD-ROM, I receive an Internal Error 2723 and an IS001 Error stating: ThePaperPort Installer doesn't respond. When I try to scan to OCR I get the message "This feature is not available because there is no OCR Softwareinstalled" When I try to scan using ControlCenter4 or ControlCenter3 for Windows, I receive the error message "Error CC3-202","Error CC4-202", "Error CC3-205" or "Error CC4-205". When installing a mediacard into the slot, the message "Card is full" appears even though the card is not full. When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY" When scanning to OCR from PaperPort® SE, using Windows XP Service Pack 2(SP2), the following error message appears: "Systemerror incurred in external ink module EZText.g32. The OCR server is unable to process the document". Why does my machine's LCD show "NO CARTRIDGE" even though I have already installed all the ink cartridges? Why does the message "Media Error" appear on the LCD when I put a memory card into the media slot on my Brother machine? Why does the message "No File" appear on the LCD when I put a memory card into the media slot on my Brother machine? Daugiau
Fax (4) ControlCenter3 displays a blank screen at startup (Windows) One or more of my colours are not printing. The rainbow cursor keeps spinning when I click on Copy/PC-FAX in ControlCenter2 (For Mac OS X 10.7). When I print, the pages are smudged with ink. What should I do?
Linux (24) All print jobs are aborted and nothing is printed. (Linux) Configure scan settings without administrator privileges (Linux) I cannot install the driver when using the Driver Install Tool. (Linux) I cannot install the LPD/LPRng driver and get a message that LPD does not exist. (Linux) I cannot scan from my Brother machine in Ubuntu 16.10 (Linux) I cannot scan when using SELinux (Security-Enhanced Linux) I cannot scan with brscan, brscan2, or brscan3 via USB (Linux) I want to print using CUPS while keeping SELinux enabled. (Linux) I'm using a Debian based distribution (e.g. Ubuntu, Kubuntu etc). When installing the CUPS Wrapper driver, I get the followingerror message: "/usr/local/Brother/cupswrapper/cupswrapper[model name]: No such file or directory". (Linux) I'm using Fedora 28 or later. I cannot scan from my Brother Machine or it says that it cannot find the Brother Machine. (Linux) I'm using SuSE 11.2. I cannot print to Brother monochrome machines. (Linux) I'm using Ubuntu 11.10 or higher. I cannot scan from my Brother Machine. (Linux) Large characters are printed incorrectly. (Linux) Paper size settings are unavailable when I print from OpenOffice (Linux) Pre-Required Procedures (Linux) Print command (LPR) (Linux) Scan using XSane or GIMP (Linux) The downloaded driver's name is different from my machine's name. (Linux) Uninstall printer drivers (Linux) Uninstall Scan-key-tool. (Linux) Uninstall the scanner driver. (Linux) When I print images, the quality is not good (Linux) When I scan multiple page documents using the ADF, all pages are fed, but only page 1 shows in XSANE. (Linux) When scanning I receive the error "Failed to start scanner : Invalid argument". (Linux) Daugiau
Mobile (1) The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device).
Others (4) How do I clear Machine Error 46? I cannot pull the paper tray out of my machine. What can I do? My computer hangs when connect with a USB Cable. The keys on the control panel do not respond.
Paper Feed / Paper Jam (5) How do I know which side up my photo paper should be in the tray? How do I load paper? How do I clear the message "PAPER JAM" from the display? I cannot feed the paper from the Photo Paper Tray. The Glossy Paper is not feeding correctly.
Print (45) Black Ink is still wet after printing on Glossy Paper (For PC Printing). Black Ink is still wet after printing on plain paper and the paper is wet (For PC Printing). Can I print from or scan to an Android™ Smartphone? Can I print from or scan to an iPhone, iPod Touch or iPad? Cannot print after a Windows 10 update (June 2020) Change the printer driver settings (Windows / macOS) How do I print envelopes? I am sharing my Brother machine from my Windows XP computer and other Windows users are not able to print. I am using the memory card function but the thumbnail images do not appear on the printout I cannot access the memory card in the media slot. I cannot make borderless prints. I get an error "Print Queue is stopped" using Mac OSX 10.2-10.4 I installed drivers from the bundled CD-ROM but I cannot print. (Mac OS X 10.5 or greater) I'm using the Simple Network Configuration capabilities of Apple® Mac OS X. The printer appears in the "PrintCenter", "Printer Setup Utility", "Print & Fax", "Print & Scan" or "Printers& Scanners", but I cannot print. I'm using Windows Vista or Windows 7 and trying to use a Brother machine connected to the network, but the machine staysoffline and I cannot print. I'm experiencing a problem when printing from Adobe® Acrobat®/ Acrobat® Reader™/ Reader® I'm using Mac OS X 10.2 - 10.4 and I'm getting an error messages when I try to print. Im using Mac OS X 10.2-10.4 and the Brother machine does not appear in the Print Center or Setup Utility. I'm using Mac OS X 10.5 or greater and I'm getting an error messages when I try to print. I'm using the Simple Network Configuration capabilities of Apple® Mac OS® X. I can print from a Macintosh®, but not from aWindows® PC. Improve poor print quality. My machine only prints one copy of my document even though I have asked it to print two or more (for Windows 2000/XP and WindowsVista). My printed documents are incomplete or a blue screen appears when printing or using PC-FAX after a Windows 10 update (March 2021) One or more of my colours are not printing. Some characters are missing when printing PDF files from Adobe® Acrobat® /Adobe® Acrobat® Reader® / Adobe® Reader®. What can I do to correct this? The Brother machine does not appear in the "Print & Fax" or "Print & Scan" Utility. (Mac OS X 10.5 or greater) The edge of glossy paper is smudged. The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater) The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device). The ink bleeds and the letters become indistinct. The Print speed is too slow using Windows®. The printer status is Offline or Paused. Using Microsoft® Word 2002, borders that use wavy lines, dots or dashes are printed as solid lines. When I print from Microsoft Excel 2002/2003, Word 2002/2003 or PowerPoint 2002/2003, semitransparent graphics are printedincorrectly. When I print from Outlook/ Outlook Express or Internet Explorer, the page does not print as expected. For example, theright or left hand portion of the page is blank or it prints on a separate piece of paper. When I print from PowerPoint using the 2 in 1 feature, some of the borders around the document are not printed or lines areprinted that shouldn't be there. When I print photos, the colour quality is not good. When I print, the pages are smudged with ink. What should I do? When I try to print thin colour borders in Microsoft Excel, the borders are printed in black. When printing a "Power Point" document with "Page Layout: 2 in 1" and the quality is set to Super Fine or Fine part of the imageis black. When printing from my Apple Mac OS® X, the print is coming out as a mirror image When selecting greyscale printing in the printer driver, does this use only the black ink or all the ink cartridges to produce thegreyscale image? Why can't I print when an ink cartridge is empty? Why do the colour ink cartridges run out of ink even though I never or rarely print in colour? Why does the message "No File" appear on the LCD when I put a memory card into the media slot on my Brother machine? Daugiau
Scan (56) Can I print from or scan to an Android™ Smartphone? Can I print from or scan to an iPhone, iPod Touch or iPad? Configure or change the settings of the ControlCenter 2 or 3 scanning options ControlCenter3 displays a blank screen at startup (Windows) How do I scan a document from the Windows Vista™ Photo Gallery? How do I scan an image and insert it into an Office 2007 application using Windows Vista/Windows 7 How do I start the Scanner and Camera Wizard in Windows Vista/ Windows 7? I am sharing my Brother machine. I can print but cannot scan. I am trying to use a Brother driver from the CD supplied with the machine or downloaded from the Internet, and I cannot scan fromWindows Server 2003, Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012. I can print but cannot scan via network. (For Macintosh) I can print but cannot scan via network. (For Windows) I can print but cannot scan via network. (For Windows) I cannot find the destination computer on the network when I try to scan a document using the machine's Scan key or controlpanel. I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X) I cannot scan via USB. (Mac OS X) I cannot use Scan to E-mail with Outlook2003 or Outlook2007 after updating ControlCenter3. The error message "command lineargument is invalid" appears. What can I do? I cannot use the Scan to E-mail with ControlCenter3 after installing Office 2010. I installed Macromedia Flash Player 8, but still I cannot use the Modern user interface of ControlCenter3. I'm using Mac OS X 10.4 / 10.5 and installed Adobe® Photoshop® CS3, but my scanner is not detected in PhotoshopCS3 although I can scan with ControlCenter2 or other applications. What should I do? I'm using Mac OS X 10.5. The network scanning feature does not work when pressing the scan key on the control panel of myBrother machine. I'm using Mac OS X 10.6.x. The network scanning feature does not work when pressing the scan key on the control panel of myBrother machine. I'm using Windows. The network scanning feature was working after I installed the driver but no longer works. What can I do? I'm using Windows. What format are the attachments when a document is scanned to e-mail and is a special viewer needed? I'm unable to scan from Corel® Paint Shop Pro® X using the WIA driver, using Windows XP Professional x64 Edition/Windows Vista™ 64-bit edition. I'm using Mac OS X 10.4 Tiger. I cannot scan after installing the scanner driver. I'm using Mac OS X 10.5. When trying to scan using the Brother ControlCenter2 with the USB interface, the ControlCenter2 screenwill close. I'm using Macintosh. What is the PreScan option used for? I'm using Windows. When I try to Scan to E-mail I get an error saying "the command line argument is not valid. Verify the switchyou are using". Locate files scanned with ControlCenter2 (For Macintosh) Locate files scanned with ControlCenter3 (For Windows) Open "Scanners and Cameras" and Properties. Scan a document from a Windows Vista application Scan a document from a Windows XP application Scan a document in Mac OS X 10.6. Scan a document in Mac OS X 10.7. Scan a document in OS X 10.8 / macOS 10.12 - 10.15. Scan a document in Windows 8 and Windows 10. Scan a document using "Scanner and Camera Wizard" in Windows XP Scan an image and insert it in a Windows XP application Scan and save a document in PDF format (Scan to File) Scan multiple pages into one file instead of each scan being saved as a separate file. The error message "[model name] cannot be found. ... (CC3-202-03031b02)" appears when scanning a document usingControlCenter3 on Windows 7 with the USB connection. The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device). The network scanning feature does not work when pressing the scan key on my Brother machine control panel. (For Windows) The scanned image is blurred, garbled, or distorted when using ControlCenter2 or the SCAN key on my Brother machine. (For Mac OS X10.5) Use the Device Selector to configure your Brother machine’s scanner function (Mac) When I click on any button in Control Center 2.0 the program crashes or freezes using Mac OS X. When I scan a document to a PDF file using ControlCenter3, the file size of the PDF is too big. How can I reduce the file size? When I scan a document using ControlCenter, the scanned file size is too big. When I try to OCR into WordPad using the ScanSoft® PaperPort® SE with OCR or the Brother ControlCenter3, the textcomes out as gibberish. This started after I installed Windows XP Service Pack 2 (SP2). Why and what should I do? When I try to scan to OCR I get the message "This feature is not available because there is no OCR Softwareinstalled" When I try to scan using ControlCenter4 or ControlCenter3 for Windows, I receive the error message "Error CC3-202","Error CC4-202", "Error CC3-205" or "Error CC4-205". When scanning to OCR from Brother ControlCenter3, the OCR application doesn't launch. I have Windows XP Service Pack 2(SP2) installed. What should I do? Why is legal scanning not an option on my Windows XP / Windows Vista computer when using the WIA driver? Which E-mail packages are compatible with ControlCenter3? While writing data to the media (memory) card in the media slot, the status dialog box has not been updated. It appears to havefrozen. What can I do? Daugiau
