"Brother" rašalai, toneriai, juostos ir terminės etiketės Pasirūpinkite, kad įrenginiai veiktų sklandžiai, naudodami originalias rašalo ir tonerių kasetes, juostas ir termines etiketes, geriausios kokybės popieriaus paketus ir greitai keičiamas atsargines dalis. Naršyti visus priedus
Copy (6) How do I make a copy on my Brother machine? One or more of my colours are not printing (blank). What can I do? The edge of glossy paper is smudged. The rainbow cursor keeps spinning when I click on Copy/PC-FAX in ControlCenter2 (For Mac OS X 10.7). Vertical streaks appear in my copies. When I print, the pages are smudged with ink. What should I do?
Error Messages (42) "How do I clear the message Unable to..." ( "Unable to Change" "Unable to Clean" "Unable to Init" "Unable to Print" "Unable toScan" )? "MFC is Busy" or "Connection Fail" error message appears. "Near Empty [Colour]" is appearing on my Brother machine's LCD? What does it mean and how do I clear it? How do I clear Machine Error 46? I cannot install the Windows 7 built-in drivers from the Windows Update provided by Microsoft®. I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X) I cannot use Scan to E-mail with Outlook2003 or Outlook2007 after updating ControlCenter3. The error message "command lineargument is invalid" appears. What can I do? I get an error "Print Queue is stopped" using Mac OSX 10.2-10.4 I get the error message Type 1,010 when I am trying to scan into Mac OS® 9 I replaced my ink cartridge but the LCD is still displaying "Near Empty". I replaced my ink cartridge, but the LCD is still displaying "Ink Empty". I'm trying to install the driver with network settings, but the installation wizard is not able to locate the Brother machineon my network, I'm getting the message "No devices could be found over the network". I'm using Windows 98 / Me / 2000 / XP or Windows NT 4.0. When trying to scan using the Brother ControlCenter2, theerror message "Scanning failed. Please try to scan the image again, if the error happens again please restart your computer,and then try to scan again. (CC031)" appears and I cannot scan. What should I do? I'm using Windows XP SP2 or Windows Server 2003. An error message referring to BRSVC01A.EXE appears after installing theprinter driver and I cannot print. What should I do? I’m using Windows XP and when I attempt to install the USB drivers on my Brother machine I receive the message "Cannot Installthis Hardware". I'm using Windows Vista. An error message referring to BRSVC01A.EXE appears after installing the printer. I'm using Windows. When I try to Scan to E-mail I get an error saying "the command line argument is not valid. Verify the switchyou are using". My Antivirus Software gives a warning message during the installation of Web BRAdmin. The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater) The Error message "A file required cannot be found.(CC035)" appears when I click the "Remote Setup" or"Quick-Dial" button in ControlCenter2. (For Macintosh) The error message "IS052 InstallNetworkDriver" appears when installing the MFL-Pro Suite from the CD-ROM or the FullDriver & Software Package is downloaded from the "Downloads" section. The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device). The LCD displays an error code (number). What does it mean? The LCD message "Standing by ON/OFF to resume" is displayed on my Brother machine. The message "No Device" appears when starting the "Status Monitor". The message "[file name] can't be opened because it is from an unidentified developer." appears on OS X v10.8.x. What does "COMM.ERROR" on the LCD display mean? When I run the Firmware update tool or the I-FAX install tool, the "Program failed to run" message appears on my PCscreen. What do I do? When I start the Remote Setup Software, the error message "RS 005-xx" or "RS 006-xx" appears on the display. When I try to install the MFL-Pro Suite from the CD-ROM, I receive an Internal Error 2723 and an IS001 Error stating: ThePaperPort Installer doesn't respond. When I try to scan to OCR I get the message "This feature is not available because there is no OCR Softwareinstalled" When installing a mediacard into the slot, the message "Card is full" appears even though the card is not full. When my PC comes out of Standby or hibernate mode the message "No Device" appears and the Status Monitor is greyed out, usingWindows® XP/XP Professional x64 Edition. When scanning to OCR from PaperPort® 9.0SE, the following error message appears: "System error incurred in externalink module EZText.g32. The OCR server is unable to process the document". I have Windows XP Service Pack 2 (SP2)installed. What should I do? When trying to use the Brother ControlCenter2, the error "CC025" appears. Why does my machine display "Awaiting Redial"? Why does my machine's LCD show "NO CARTRIDGE" even though I have already installed all the ink cartridges? Why does the LCD on my machine say 'INK EMPTY' when there is still Ink remaining? Why does the message "Media Error" appear on the LCD when I put a memory card into the media slot on my Brother machine? Why does the message "No File" appear on the LCD when I put a memory card into the media slot on my Brother machine? Why does the message "No Response/Busy" appear on my Transmission Verification Report? While I'm scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do? Daugiau
Fax (18) Can I confirm that the FAX was sent correctly? Can I remotely access my Brother machine to listen to my voice messages and forward my faxes to another machine? Changes to the contents stored in the address book do not become effective in the stored speed dial numbers in Windows. ControlCenter3 displays a blank screen at startup (Windows) Do I need a telephone line to send and receive faxes with my Brother machine? How do I use my Outlook contacts with my Brother PC-Fax software? How many times will my Brother machine automatically redial a busy number? I am trying to receive faxes into my Windows® PC with the MFC connected to a phone line using distinctive ring. The PC-FAX Receivesoftware is answering all incoming calls, regular ring and distinctive ring. I am using Voice Over Internet Protocol (VoIP) and cannot send and/or receive faxes. What can I do? I cannot receive a colour fax. I want to use a name from my Windows® 2000/XP address book to send a FAX. The address book is stored on a network share and when Itry to access the address book it will not open. One or more of my colours are not printing (blank). What can I do? Send a fax without scanning the documents into memory. The rainbow cursor keeps spinning when I click on Copy/PC-FAX in ControlCenter2 (For Mac OS X 10.7). What does "NG" or "ERROR" on the Transmission Verification Report mean? When I print, the pages are smudged with ink. What should I do? When receiving a single page fax, why does the fax print on two pages or a blank sheet ejects afterwards? Why are my sent faxes always received with a black vertical line down the page? Daugiau
Linux (22) All print jobs are aborted and nothing is printed. (Linux) Configure scan settings without administrator privileges (Linux) Delete a network scanner entry. (Linux) I cannot install the driver when using the Driver Install Tool. (Linux) I cannot install the LPD/LPRng driver and get a message that LPD does not exist. (Linux) I cannot scan from my Brother machine in Ubuntu 16.10 (Linux) I cannot scan when using SELinux (Security-Enhanced Linux) I cannot scan with brscan, brscan2, or brscan3 via USB (Linux) I want to print using CUPS while keeping SELinux enabled. (Linux) I'm using a Debian based distribution (e.g. Ubuntu, Kubuntu etc). When installing the CUPS Wrapper driver, I get the followingerror message: "/usr/local/Brother/cupswrapper/cupswrapper[model name]: No such file or directory". (Linux) I'm using Fedora 28 or later. I cannot scan from my Brother Machine or it says that it cannot find the Brother Machine. (Linux) I'm using SuSE 11.2. I cannot print to Brother monochrome machines. (Linux) I'm using Ubuntu 11.10 or higher. I cannot scan from my Brother Machine. (Linux) Paper size settings are unavailable when I print from OpenOffice (Linux) Pre-Required Procedures (Linux) Print command (LPR) (Linux) Scan using XSane or GIMP (Linux) Uninstall printer drivers (Linux) Uninstall Scan-key-tool. (Linux) Uninstall the scanner driver. (Linux) When I scan multiple page documents using the ADF, all pages are fed, but only page 1 shows in XSANE. (Linux) When scanning I receive the error "Failed to start scanner : Invalid argument". (Linux) Daugiau
Mobile (1) The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device).
Others (3) How do I clear Machine Error 46? My computer hangs when connect with a USB Cable. The keys on the control panel do not respond.
Paper Feed / Paper Jam (3) Glossy Paper is not feeding correctly. How can I clear the "PAPER JAM" or "PRINTER JAM" error message? I am having issues with the paper feed. What can I do?
Print (49) Black Ink is still wet after printing on Glossy Paper Black Ink is still wet after printing on plain paper. Can I print from or scan to an Android™ Smartphone? Can I print from or scan to an iPhone, iPod Touch or iPad? Cannot print after a Windows 10 update (June 2020) Change the printer driver settings (Windows / macOS) How do I print on an envelope? I am sharing my Brother machine from my Windows XP computer and other Windows users are not able to print. I am using the memory card function but the thumbnail images do not appear on the printout I am using Windows/ Mac OS 8.x-9.x. When I print from Adobe® Illustrator® with PCL printer driver, text and imagesare jagged. I cannot access the memory card in the media slot. I cannot print from my computer via network (for Macintosh). I cannot print from my computer via network. (For Windows) I get an error "Print Queue is stopped" using Mac OSX 10.2-10.4 I installed drivers from the bundled CD-ROM but I cannot print (Mac OS X 10.5 or greater) I'm using Windows Vista or Windows 7 and trying to use a Brother machine connected to the network, but the machine staysoffline and I cannot print. I'm using Windows XP SP2 or Windows Server 2003. An error message referring to BRSVC01A.EXE appears after installing theprinter driver and I cannot print. What should I do? I'm using Windows. Print speed is too slow. What can I do? I'm experiencing a problem when printing from Adobe® Acrobat®/ Acrobat® Reader™/ Reader® I'm using Mac OS X 10.2 - 10.4 and I'm getting an error messages when I try to print. Im using Mac OS X 10.2-10.4 and the Brother machine does not appear in the Print Center or Setup Utility. I'm using Mac OS X 10.5 or greater and I'm getting an error messages when I try to print. I'm using the Simple Network Configuration capabilities of Apple® Mac OS X. The printer appears in the "Print Center","Printer Setup Utility", "Print & Fax" or "Print & Scan", but I cannot print. I'm using the Simple Network Configuration capabilities of Apple® Mac OS® X. I can print from a Macintosh®, but not from aWindows® PC. I'm using Windows Vista. An error message referring to BRSVC01A.EXE appears after installing the printer. My machine only prints one copy of my document even though I have asked it to print two or more (for Windows 2000/XP and WindowsVista). My printed documents are incomplete or a blue screen appears when printing or using PC-FAX after a Windows 10 update (March 2021) One or more of my colours are not printing (blank). What can I do? Some characters are missing when printing PDF files from Adobe® Acrobat® /Adobe® Acrobat® Reader® / Adobe® Reader®. What can I do to correct this? The Brother machine does not appear in the "Print & Fax" or "Print & Scan" Utility. (Mac OS X 10.5 or greater) The edge of glossy paper is smudged. The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater) The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device). The printer status is Offline or Paused. The printout is out of alignment or the size of the printed document is reduced when printing the document from Microsoft Word2010. The white horizontal lines appears on the printed image from the PaperPort® software Using Microsoft® Word 2002, borders that use wavy lines, dots or dashes are printed as solid lines. When I print from Microsoft Excel 2002/2003, Word 2002/2003 or PowerPoint 2002/2003, semitransparent graphics are printedincorrectly. When I print from Outlook/ Outlook Express or Internet Explorer, the page does not print as expected. For example, theright or left hand portion of the page is blank or it prints on a separate piece of paper. When I print from PowerPoint using the 2 in 1 feature, some of the borders around the document are not printed or lines areprinted that shouldn't be there. When I print, the pages are smudged with ink. What should I do? When I try to print thin colour borders in Microsoft Excel, the borders are printed in black. When printing a "Power Point" document with "Page Layout: 2 in 1" and the quality is set to Super Fine or Fine part of the imageis black. When printing from my Apple Mac OS® 10.x the print is coming out like a mirror image When printing from Microsoft Word using Windows® 2000 or XP the document does not print on the paper size that I selected in theprinter driver. When selecting greyscale printing in the printer driver, does this use only the black ink or all the ink cartridges to produce thegreyscale image? Why can't I print when an ink cartridge is empty? Why do the colour ink cartridges run out of ink even though I never or rarely print in colour? Why does the message "No File" appear on the LCD when I put a memory card into the media slot on my Brother machine? Daugiau
Scan (58) Can I print from or scan to an Android™ Smartphone? Can I print from or scan to an iPhone, iPod Touch or iPad? Configure or change the settings of the ControlCenter 2 or 3 scanning options ControlCenter3 displays a blank screen at startup (Windows) How do I scan a document from the Windows Vista™ Photo Gallery? How do I scan an image and insert it into an Office 2007 application using Windows Vista/Windows 7 How do I start the Scanner and Camera Wizard in Windows Vista/ Windows 7? I am sharing my Brother machine. I can print but cannot scan. I am trying to use a Brother driver from the CD supplied with the machine or downloaded from the Internet, and I cannot scan fromWindows Server 2003, Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012. I can print but cannot scan via network. (For Macintosh) I can print but cannot scan via network. (For Windows) I cannot scan to network using my Brother machine's control panel or the SCAN key on Mac (10.7 or later) I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X) I cannot scan via USB. (Mac OS X) I cannot use Scan to E-mail with Outlook2003 or Outlook2007 after updating ControlCenter3. The error message "command lineargument is invalid" appears. What can I do? I cannot use the Scan to E-mail with ControlCenter3 after installing Office 2010. I get the error message Type 1,010 when I am trying to scan into Mac OS® 9 I'm using Mac OS X 10.4 / 10.5 and installed Adobe® Photoshop® CS3, but my scanner is not detected in PhotoshopCS3 although I can scan with ControlCenter2 or other applications. What should I do? I'm using Mac OS X 10.5. The network scanning feature does not work when pressing the scan key on the control panel of myBrother machine. I'm using Mac OS X 10.6.x. The network scanning feature does not work when pressing the scan key on the control panel of myBrother machine. I'm using Windows 98 / Me / 2000 / XP or Windows NT 4.0. When trying to scan using the Brother ControlCenter2, theerror message "Scanning failed. Please try to scan the image again, if the error happens again please restart your computer,and then try to scan again. (CC031)" appears and I cannot scan. What should I do? I'm using Windows XP. I can't scan or the scanner doesn't work properly after installing the WIA driver. What canI do? I'm using Windows. The network scanning feature was working after I installed the driver but no longer works. What can I do? I'm scanning multiple pages to be emailed to one email address using the Scan to Email function on the Brother Control Center 2.0but an email message is being created for each page. I'm unable to scan from Corel® Paint Shop Pro® X using the WIA driver, using Windows XP Professional x64 Edition/Windows Vista™ 64-bit edition. I'm using Mac OS X 10.4 Tiger. I cannot scan after installing the scanner driver. I'm using Mac OS X 10.5. When trying to scan using the Brother ControlCenter2 with the USB interface, the ControlCenter2 screenwill close. I'm using Windows. When I try to Scan to E-mail I get an error saying "the command line argument is not valid. Verify the switchyou are using". Open "Scanners and Cameras" and Properties. Scan a document from a Windows Vista application Scan a document from a Windows XP application Scan a document in Mac OS X 10.6. Scan a document in Mac OS X 10.7. Scan a document in OS X 10.8 / macOS 10.12 - 10.15. Scan a document in Windows 8 and Windows 10. Scan a document using "Scanner and Camera Wizard" in Windows XP Scan an image and insert it in a Windows XP application Scan and save a document in PDF format (Scan to File) Scan multiple pages into one file instead of each scan being saved as a separate file. Scan to Email does not work with Outlook2002, Outlook2003 or Outlook2007. Scan to Email does not work with Outlook2003 or Outlook2007. (For ControlCenter3 Users) The error message "No Supported Devices Found" appears in Brother iPrint&Scan (mobile device). The link icon for Outlook Express is not displayed in PaperPort®. The network scanning feature does not work when pressing the scan key on my Brother machine control panel. (For Windows) The scanned image is blurred, garbled, or distorted when using ControlCenter2 or the SCAN key on my Brother machine. (For Mac OS X10.5) Use the Device Selector to configure your Brother machine’s scanner function (Mac) What are the settings in the Scanner window used for on an Apple Mac? What format are the attachments when a document is scanned to an e-mail address and is a special viewer needed? What is the PreScan option used for on an Apple Mac? When I click on any button in Control Center 2.0 the program crashes or freezes using Mac OS X. When I scan a document using ControlCenter, the scanned file size is too big. When I try to OCR into WordPad using PaperPort® 8.0SE or 9.0SE or Brother Control Center, the text comesout as gibberish. This started after I installed Windows XP Service Pack 2 (SP2). Why and what should I do? When I try to scan to OCR I get the message "This feature is not available because there is no OCR Softwareinstalled" When scanning to OCR from Brother Control Center 2.0, the OCR application doesn't launch. I have Windows XP Service Pack2 (SP2) installed. What should I do? Why is legal scanning not an option on my Windows XP / Windows Vista computer when using the WIA driver? Which E-mail packages are compatible with ControlCenter2?(For Windows 2000/XP) Which E-mail packages are compatible with ControlCenter3? While writing data to the media (memory) card in the media slot, the status dialog box has not been updated. It appears to havefrozen. What can I do? Daugiau
Telephone (2) Can I use voice mail on the same line as my Brother machine? I can receive a fax, but cannot receive a call.
